Mazda LF - Cylinder Head (II) Disassembly

ENGINE
B–7
B
Tappet Disassembly Note
Note
• The tappets are numbered to make sure they are assembled in their original positions. When removed,
keep the tappets with the cylinder head they were removed from. Do not mix the tappets.
Cylinder Head Bolt Disassembly Note
1. Loosen the cylinder head bolts in two or three
steps in the order shown.
End Of Sie
CYLINDER HEAD (II) DISASSEMBLY
A6E242402000E06
1. Disassemble in the order indicated in the table.
2.
.
AME2224E005
AME2224E008
1 Engine hanger
2 Valve keeper
(See B–8 Valve Keeper Disassembly Note)
3 Upper valve spring seat
4 Valve spring
5Valve
6 Valve seal
(See B–8 Valve Seal Disassembly Note)
7 EGR pipe
8 Water outlet case
1731‑1E‑02C.book7ページ２００２年４月２６日 金曜日 午前１０時３０分