Mazda LF - CYLINDER HEAD (I) ASSEMBLY

ENGINE
B–37
B
3. Tighten the rear oil pan bolts in the order as
shown.
Tightening torque:
20—30 N·m {2.1—3.0 kgf·m, 15.2—21.6
in·lbf}
End Of Sie
CYLINDER HEAD (I) ASSEMBLY
A6E242402000E11
1. Assemble in the order indicated in the table.
.
AME2224E056
AME2224E044
1 Water outlet case
2 EGR pipe
3 Valve seal
(See B–38 Valve Seal Assembly Note)
4Valve
5 Valve spring
6 Upper valve spring seat
7 Valve keeper
(See B–38 Valve Keeper Assembly Note)
8 Engine hanger
1731‑1E‑02C.book37ページ２００２年４月２６日 金曜日 午前１０時３０分