Mazda LF - ELECTRICAL SYSTEM; ELECTRICAL PARTS; CONNECTORS

GI–10
ELECTRICAL SYSTEM
ELECTRICAL PARTS
A6E201700006E01
Battery cable
• Before disconnecting connectors or removing
electrical parts, disconnect the negative battery
cable.
Wiring Harness
• To remove the wiring harness from the clip in the
engine room, pry up the hook of the clip using a
flathead screwdriver.
End Of Sie
CONNECTORS
A6E201700006E02
Data link connector
• Insert the probe into the terminal when
connecting a jumper wire to the data link
connector.
Caution
•
••
•
Inserting a jumper wire probe into the
data link connector terminal may damage
the terminal.
Disconnecting connectors
• When disconnecting connector, grasp the
connectors, not the wires.
ELECTRICAL SYSTEM
WGIWXX0007E
X3U000WBU
X3U000WAY
WGIWXX0041E
1731‑1E‑02C.book10ページ２００２年４月２６日 金曜日 午前１０時３０分