Mazda LF - FUNDAMENTAL PROCEDURES; PREPARATION OF TOOLS AND MEASURING EQUIPMENT; SPECIAL SERVICE TOOLS; DISASSEMBLY

GI–6
FUNDAMENTAL PROCEDURES
PREPARATION OF TOOLS AND MEASURING EQUIPMENT
A6E201400004E02
• Be sure that all necessary tools and measuring
equipment are available before starting any work.
End Of Sie
SPECIAL SERVICE TOOLS
A6E201400004E03
• Use special service tools or equivalent when they
are required.
End Of Sie
DISASSEMBLY
A6E201400004E07
• If the disassembly procedure is complex,
requiring many parts to be disassembled, all parts
should be marked in a place that will not affect
their performance or external appearance and
identified so that reassembly can be performed
easily and efficiently.
End Of Sie
FUNDAMENTAL PROCEDURES
X3U000WAH
X3U000WAJ
X3U000WAL
1731‑1E‑02C.book6ページ２００２年４月２６日 金曜日 午前１０時３０分