B–36
ENGINE
Drive Plate (ATX), Flywheel (MTX) Assembly Note
1. Hold the crankshaft using the SST.
2. Tighten the bolts in the order indicated in the
figure in several passes.
Oil pan Assembly Note
1. Apply a continuous bead of silicone sealant to the
oil pan as indicated in the figure.
2. Use a square ruler to unite the oil pan and the
cylinder block junction side on the engine front
cover side.
AME2224E102
AME2224E555
AME2224E054
1731‑1E‑02C.book36ページ２００２年４月２６日 金曜日 午前１０時３０分
To Next Page
Loading...