ENGINE
B–25
B
End Of Sie
VALVE CLEARANCE ADJUSTMENT
A6E242412111E03
1. Remove the engine front cover lower blind plug.
2. Remove the engine front cover upper blind plug.
3. Remove the cylinder block lower blind plug.
4. Install the SST as shown.
5. Turn the crankshaft clockwise the crankshaft is in
the No.1 cylinder TDC position.
6. Loosen the timing chain.
(1) Using a suitable screwdriver or equivalent
tool, unlock the chain tensioner ratchet.
(2) Turn the exhaust camshaft clockwise using a
suitable wrench on the cast hexagon and
loosened the timing chain.
(3) Placing the suitable bolt (M6 X 1.0 Length
25—35 mm {0.9—1.3 in}) at the engine front
cover upper blind plug, secure the chain
guide at the position where the tension is
released.
AMJ2212E004
AME2212W004
AME2212W005
1731‑1E‑02C.book25ページ２００２年４月２６日 金曜日 午前１０時３０分
To Next Page
Loading...