J94S.book Page 24 Saturday, June 23, 2001 1:04 PM
Interior Comfort
Audio System
▼ Operating the Radio
Band selector buttons Display
Radio ON
Press a band selector button ( AM or
FM1/2) to turn the radio on.
Band selection
Choose AM by pressing the AM button
( AM ) and FM by pressing the FM1/2
button (FM1/2).
The selected m ode will be indicated. If
FM stereo is being received, "ST" will be
displayed.
NOTE
If the FM broadcast signal becomes
weak, reception automatically changes
from STe Re O to MONO for reduced
noise, and the "ST" indicator will go
out.
6-24
Tuning
The radio has the following tuning
methods: Manual, Seek, Scan, Preset
channel, and Auto memory tuning. The
easiest way to tune stations is to set them
on preset channels.
If the power supply is interrupted (fuse
blows or the battery is disconnected),
the preset channels will be canceled.
M anual tuning
Turning the manual tuning knob will
change the frequency higher or lower.
Form No. 8Q50-EA-01G
To Next Page
Loading...
