J94S.book Page 23 Saturday, June 23, 2001 1:04 PM
Interior Comfort
Audio System
Changing the display mode
The display on the unit can be changed by
pressing the clock button ( CLOCK ). This
alternates the display between time and
audio. W hen the clock mode has been
selected, the tim e will be displayed.
NOTE
If audio operation is selected while the
time mode is on, the selected audio
mode w ill be displayed for ten
seconds, then the display will revert to
the time mode.
6-23
Form No. 8Q50-EA-01G
To Next Page
Loading...
