15
5. How to Use
5-1 : Standard Folding of Standard-size Paper
[1] Raise the paper feed table lever.
[2]
Set the paper guide for the appropriate paper size.
[3] Neatly stack the paper on the feed table with the
printed side facing up.
(printed side down in case of fold-out)
[4] Lower the paper feed table lever.
[5]
Setting the paper exit roller:
The exit roller should be moved to the proper position
according to the paper size. Refer to the “Roller Position
Indication” label. If ejection is not performed properly, try
a different position.
Example:
Set the roller to position ONE when using A3 paper.
[6] Select the fold type.
Select from among the six fold types (Single,
Double, parallel, Fold-out, Letter, Zigzag, Gate).
Press the desired fold type key.
Caution!
Be sure to ensure that ink has dried completely on printed materials. In case of immediately
after printed documents, they may cause jamming, double feeding, paper slippage or wrinkles.
To Next Page
Loading...
Need help?
General
