33
5-8-3 : Interval mode
[1] Press the “Num Key” key
[2] Press the “Interval” key on the counter input screen, and
the interval setting screen will be displayed.
[3] Press the “Set up sheets” key. Input desired sheets
quantity and press Enter.
By the same procedure, set up “Set Interval Second” and
“Set up Sets”.
▪ When all the values are input, will be displayed again.
[4] When the Interval mode is activated, two values, namely,
processed number of sheets and the number of sets will
be displayed on the counter display.
To Next Page
Loading...
Need help?
General
