d
Restart the Advanced Threat Defense Appliance.
e
Enter the management port speed and duplex settings using one of the following commands:
• set mgmtport auto — Sets the management port in auto mode for speed and duplex.
• set mgmtport speed (10|100) duplex (full|half) — Sets the speed to 10 or 100 Mbps at
full or half duplex.
f
To change the Advanced Threat Defense Appliance password, enter passwd.
Passwords are case sensitive, must not include spaces, and must contain the following:
• Between 8 and 25 characters
• At least one uppercase letter
• At least one lowercase letter
• At least one digit
• At least one alphanumeric character or symbol
Best Practice: Enter a password with a combination of characters that is easy for you to remember, but
dicult for someone else to guess.
g
Verify the conguration.
• To view the conguration details, enter show.
• To check the network connectivity, enter ping <IP address>.
The success message host <ip address> is alive appears. If the host is not reachable, failed
to talk to <ip address> appears.
Copyright © 2018 McAfee, LLC
McAfee and the McAfee logo are trademarks or registered trademarks of McAfee, LLC or its subsidiaries in the US and other countries. Other
marks and brands may be claimed as the property of others.
0-00
17
To Next Page
Loading...
