32
8. Remove the release sheet locking clips,
the bars, and the upper and lower release
sheets. Wash and rinse the clips and bars
in the 3-compartment sink. If necessary,
soak them in a hot solution of SolidSense
APSC to remove carbon accumulatio n.
(See Figure 67.)
Figure 67
9. Set the release sheets aside on a clean,
flat surface until further cleaning is
performed. Do not fold, crease, or place
them on sharp objects. (See Figure 68.)
Figure 68
10. Scrape the lower grill surface with the grill
scraper, in a front to back direction.
(See Figure 69.)
Figure 69
11. Use the grill squeegee to push residual
grease into the grease pans.
(See Figure 70.)
Figure 70
12. Remove, empty, and reinstall the grease
pans. (See Figure 71.)
Figure 71
13. Open one packet of McD Hi-Temp Grill
Cleaner (HTGC). Empty the contents into
an entrée base or stainless steel pan.
(See Figure 72.)
Figure 72
To Next Page
