Special Operations
- Saddle Fusion Procedure
5 - 5
Fuse Fitting to Pipe
Remove the heater with a snap action and quickly inspect the
melt pattern. Quickly move the carriage to the right bringing
the fitting and main together under the pipe manufacturer's
recommended pressure.
TX00466-9-14-94
PH00403-9-21-94
Allow Joint to Cool
Allow the joint to cool under pressure as specified by the pipe
manufacturer. To maintain fusion pressure during cooling, the
carriage control valve must be positioned in the right hand
direction.
TX00467-9-14-94
PH00405-9-21-94
To Next Page
Loading...
