Install/Remove Covers
Hook top of cowl on three clips. Align the thumbscrew in the
socket and tighten.
Align the rear latches and fasten the latch, making sure it locks.
The cowl should be outside the dash panel
Align and fasten the front latch the same way.
Reverse the procedure to remove the cowls.
TX01994-1-10-02
PH01976-11-15-00
Maintenance
7 - 2
PH01974-11-15-00PH01975-11-15-00
PH02245-1-10-02
To Next Page
Loading...
