McHale 991BC - Page 42

McHale 991B Round Bale Wrapper
42
Reset Timing Period
8.1.8 Channel 6 - Bale Wrapping Speed
Displays instantaneous r.p.m. of the bale wrapper at 3 second intervals in the range
10-99 r.p.m. An overspeed alarm will sound if the r.p.m exceeds a pre-programmable
limit. The display will default to this channel and flash for the duration of the
overspeeding, subsequently reverting to the “current/target wraps” display.
Display Bale Wrapping Speed
8.1.9 Program the Overspeed Alarm
Press to select
Press and hold
Press to select
Switch power on while pressed
Release