McIntosh C53 User Manual

C53 Audio Preamplifier Passthru Connection Diagram
2A
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549 Part No. 24100800
Note: Refer to the C53 Owner’s Manual page 8 for additional connection information.
Connection Legend:
Data Cable*- Digital Signal Cable -
Sensor/Keypad Cable - RS232 Cable -
Power Control Cable* - Ground Wire -
Audio Signal Cable - AC Power Cords -
Video Signal Cable - Loudspeaker Cable -
RF Signal Cable -
* 2 conductor shielded with 1/8 inch stereo mini phone plug on each end.
Connect to
AC Outlet
A/V Processor
Power Amplifier (Right Channel) - Main Room
(Partial View)
Power Amplifier (Left- Channel) - Main Room
(Partial View)

McIntosh C53 Specifications

General

Total Harmonic Distortion	0.005%
Signal to Noise Ratio	100dB
Input Impedance	20K ohms
Output Impedance	200 ohms
Type	Preamplifier
Power Consumption	50 watts
Frequency Response	+0, -0.5dB from 20Hz to 20, 000Hz
Dimensions	17-1/2 inches (44.45cm) wide, 6 inches (15.24cm) high (including feet), 18 inches (45.72cm) deep (including front panel and cables)
Headphone Output	Yes
Digital Inputs	2 Coaxial, 2 Optical, 1 USB, 1 MCT
Analog Inputs	3 Balanced, 4 Unbalanced
Analog Outputs	XLR, RCA
USB Input	Yes
Outputs	Refer to Analog Outputs
Digital-to-Analog Converter (DAC)	32-bit/384kHz PCM, DSD256