EasyManuals Logo

McIntosh MC1.2KW User Manual

McIntosh MC1.2KW
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
18
Specifications
Specifications
Power Output
Minimum sine wave continuous average power output is:
1,200 watts into 2 ohm load
1,200 watts into 4 ohm load
1,200 watts into 8 ohm load
Output Load Impedance
2, 4 or 8 ohms
Rated Power Band
20Hz to 20,000Hz
Total Harmonic Distortion
0.005% maximum harmonic distortion at any power level
from 250 milliwatts to rated power, 20Hz to 20,000Hz
Dynamic Headroom
2dB
Frequency Response
+0, -0.25dB from 20Hz to 20,000Hz
+0, -3dB from 10Hz to 100,000Hz
Input Sensitivity (for rated output)
2.5 Volt Unbalanced
5 Volt Balanced
Signal To Noise Ratio (A-Weighted)
120dB below rated output, Unbalanced
124dB below rated output, Balanced
Intermodulation Distortion
0.005% maximum, if the instantaneous peak power output
does not exceed twice the rated power output for any com
-
bination of frequencies from 20Hz to 20,000Hz.
Wide Band Damping Factor
Greater than 40
Input Impedance
10,000 ohms
Power Guard
Less than 2% THD with up to 14dB overdrive at 1,000Hz
Power Requirements
100 Volts, 50/60Hz at 15 Amps
110 Volts, 50/60Hz at 12.5 Amps
120 Volts, 50/60Hz at 12 Amps
220 Volts, 50/60Hz at 7.5 Amps
230 Volts, 50/60Hz at 6.5 Amps
240 Volts, 50/60Hz at 6.5 Amps
Standby: 0.5 watts
Note: Refer to the rear panel of the MC1.2KW for the correct
voltage.
Overall Dimensions
Width is 17-3/4 inches (45.09cm)
Height is 12-5/16 inches (31.27cm) including feet
Depth is 22 inches (55.88cm) including the Front Panel and
Cables
Weight
147 pounds (66.7 kg) net, 172 pounds (78.0 kg) in shipping
carton
Shipping Carton Dimensions
Width is 31 inches (78.74cm)
Depth is 28 inches (71.12cm)
Height is 17-1/4 inches (43.82cm)

Other manuals for McIntosh MC1.2KW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the McIntosh MC1.2KW and is the answer not in the manual?

McIntosh MC1.2KW Specifications

General IconGeneral
Damping factor100
Amplifier class-
Frequency range10 - 100000 Hz
Output impedance8 Ω
Audio output channels1.0 channels
Peak power per channel1200 W
Signal-to-Noise Ratio (SNR)124 dB
Total Harmonic Distortion (THD)0.005 %
Speakers connectivity typeBinding post
PurposePerformance/stage
Product colorBlack, Silver
Connectivity technologyWired
LED indicatorsYes
Weight and Dimensions IconWeight and Dimensions
Depth558.8 mm
Width450.9 mm
Height312.7 mm
Weight66700 g

Related product manuals