McIntosh MC352 User Manual

6
MC352 Rear Panel Controls and
Connections
Connect the MC352
power cord to a live
AC outlet. Refer to
information on the
back panel to deter-
mine the correct
voltage
BALANCED INPUTS for audio
cables from a preamplifier or
control center audio outputs
POWER CONTROL In receives
turn on/off signals from a McIntosh
component and the POWER CON-
TROL Out sends that turn on/off
signal to the next McIntosh compo-
nent
UNBALANCED IN-
PUTS for audio cables
from a preamplifier or
control center audio out-
put
OUTPUT Connections
for 2 ohm loudspeakers
Main Fuse holder,
refer to infromation
on the back panel
of your MC352 to
determine the cor-
rect fuse size and
rating
MC352 Rear Panel Controls and Connections
INPUT MODE switch
selects different modes
of operation
OUTPUT MODE
switch selects
different modes
of operation
OUTPUT Connections for
4 or 8 ohm loudspeakers
OUTPUT Connections for
4 or 8 ohm loudspeakers

McIntosh MC352 Specifications

General

Power Output	350 watts per channel
Number of Channels	2
Total Harmonic Distortion	0.005%
Frequency Response +0, -3dB	10Hz to 100kHz
Signal to Noise Ratio	112dB
S/N Ratio	112dB
Dynamic Headroom	1.8dB
Input Impedance	10k ohms
Voltage Gain	29dB
Dimensions	9.5" (24.13cm) H x 17.5" (44.45cm) W x 18" (45.72cm) D
Weight	98 lbs (44.45 kg)
Frequency Response	20Hz to 20kHz +0, -0.25dB
Damping Factor	40
Output Impedance	2, 4, or 8 ohms