23
Packing Instructions
Quantity Part Number Description
1 033775 Shipping carton only
2 034132 End cap (Foam pad)
Packing Instructions
In the event it is necessary to repack the equipment for
shipment, the equipment must be packed exactly as shown
below, failure to do so will result in shipping damage.
Make sure that the Top Glass Panel is firmly secured to the
chassis using the supplied hex head screws.
Use the original shipping carton and interior parts only
if they are all in good serviceable condition. If a shipping
carton or any of the interior part(s) are needed, please call
or write Customer Service Department of McIntosh Labo-
ratory. Please see the Part List for the correct part numbers.
To Next Page
Loading...
