13
Home Controller
McIntosh CR16 Multizone Controller
McIntosh DVD Player
How to Connect Multizone, Data and Power Control
IR Sensor
1. Connect a Data Control Cable from the MX135 DVD
(input 11) Data Port to the McIntosh DVD Player Data
In Jack.
Note: By adding a McIntosh Remote Control Translator to
the MX135, non McIntosh Source Devices such as a
Satellite Receiver can be remotely controlled using a
McIntosh Remote Control and Keypads.
2. Connect a Data Control Cable from the MX135
HOME Data Port to the Home Controller Data In Jack.
3. Connect a 4 conductor shielded cable from the MX135
ZONE A KEYPAD Socket to a McIntosh WK-4 Key-
pad.
4. Connect a DB37 Cable, shielded straight through 37
How to Connect Multizone, Data and Power
Control
conductor, from the MX135 TO MULTIZONE CON-
TROLLER Connector to the CR16 Multizone “Con-
troller Input B” socket.
5. Connect a Power Control Cable from the MX135
POWER CONTROL ACC Jack to the McIntosh DVD
Player Power Control In Jack.
6. Connect a Power Control Cable from the MX135
POWER CONTROL A Jack to the McIntosh Powered
Subwoofer Power Control In Jack.
7. Connect a Power Control Cable from the McIntosh
Powered Subwoofer Power Control Out Jack to the
McIntosh Power Control AC Outlet Strip Power Con-
trol Jack.
8. Optionally, connect a Data Control Cable from the
MX135 IR INPUTS A to an external IR Sensor.
McIntosh WK-4 Keypad
McIntosh
Power
Control
McIntosh Powered Subwoofer
To Next Page
Loading...
