EasyManua.ls Logo

McIntosh MX135 - Changing Volume Setup; Setting Zone Volume Presets and Maximums

McIntosh MX135
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
37
How to Change the Volume Setup
The MX135 has provisions for setting the wake-up volume
listening level for Zones A and B. A maximum volume lis-
tening level can also be set for both zones.
1. Press and hold the Front Panel SETUP Push-button ap-
proximately three seconds to enter the Setup Mode.
The word SETUP will appear on the MX135 Front
Panel Display and the MAIN SYSTEM SETUP Menu
will appear on the Monitor/TV screen. Refer to figure
6 on page 23.
2. Using the Up or Down directional push-buttons on
the Remote Control, select VOLUME SETUP on the
On-Screen Menu, followed by the SELECT/OK Push-
button. Refer to figure 24.
3. Using the Up or Down directional push-buttons,
select ZONE A VOLUME PRESET from the On-
Screen Menu, followed by pressing the Left or
Right directional push-buttons to select either LAST
(the last volume level listened to) or a fixed (0-99)
wake-up volume level. Refer to figure 25.
Note: The Remote Control Volume Up
and Down
push-buttons may also be used.
4. Using the Up or Down directional push-buttons,
select ZONE A VOLUME MAXIMUM from the On-
Screen Menu, followed by pressing the Left or
Right directional push-buttons to select the maxi-
mum volume level.
5. If desired, make similar adjustments for Zone B.
6. Continue to the ADVANCED settings on page 38. If
you do not wish to perform ADVANCED settings at
this time, select MAIN MENU from the menu. The
MAIN SYSTEM SETUP Menu will reappear on the
Monitor/TV screen and proceed to the next step.
7. Select EXIT from the MAIN SYSTEM SETUP Menu.
If you are satisfied with the changes that you may have
made, select YES to save those changes or NO not to
save them. The MX135 will then return to normal op-
eration. Refer to figure 7 on page 24.
SETUP, con’t
Zone Default Setting New Setting
Zone A Wake-Up Last
Zone A Maximum 99
Zone B Wake-Up 20
Zone B Maximum 99
Zone Volume Levels
Figure 24
MENU: MAIN SYSTEM SETUP
SPEAKER SIZE
SPEAKER TIME DELAY
SPEAKER LEVEL
INPUT SETUP
ÆVOLUME SETUP
ADVANCED
EXIT
Figure 25
MENU: VOLUME SETUP
ÆZONE A VOLUME PRESET: LAST
ZONE A VOLUME MAXIMUM: 99
ZONE B VOLUME PRESET: 20
ZONE B VOLUME MAXIMUM: 99
MAIN MENU

Table of Contents

Other manuals for McIntosh MX135

Related product manuals