McKesson Consult - Configuration of the Consult Hemoglobin Analyzer

11
 A fully charged battery lasts up to 40 days / 10,000 tests of continuous use. The battery must be
charged when the last status bar is shown, at the latest when E07 is indicated on the display, see page 19,
Troubleshooting Guide (section 9).
 After 9 months, the battery must be fully charged, whether or not the instrument has been in use.
6.2 CONFIGURATION OF ANALYZER
The Consult
®
Hemoglobin analyzer is delivered with the following default configuration:
- Unit of measurement: g/dL
- Displayed result: Hb only
- Bluetooth function: off
- Time & date: off
The actual result is displayed and transmitted at the time of measurement. It is replaced by the next
measurement without saving to the device memory.
The following additional functions can be activated and configured using EKF Link software for basic and
advanced settings (available features depending on software license). Please visit www.ekflink.com for
information on EKF Link software, or contact EKF Diagnostics or your local distributor.
Basic settings
Date & time:
The time format can be set as 24 hours or 12 hours with am/pm indicator.
The date format can be set to display the following formats:
YYYY-MM-DD
DD-MM-YYYY
MM-DD-YYYY
with the variables Y for year, M for month and D for day.
Note! The use of the device memory function requires the activation of the date and time function prior
to use.
CONSULT
®
HEMOGLOBIN TESTING SYSTEM USER MANUAL