McKesson Consult - Consult Hemoglobin Cuvettes; Control Material for Hemoglobin Testing

6
CONSULT
®
HEMOGLOBIN TESTING SYSTEM USER MANUAL
CONSULT
®
HEMOGLOBIN CUVETTES
Cuvettes are ready for use upon removal from the package. A sample volume of 10 µL is required to ensure
proper filling of the Consult
®
Hemoglobin Cuvette. The cuvette serves as sample collector and measuring
cuvette at the same time. The blood sample is drawn into the cavity by capillary force.
Refer to the product label and package insert of the Consult
®
Hemoglobin Cuvettes for information on
storage and expiry. Unused cuvettes should be stored in their original bag.
CONTROL MATERIAL
Consult
®
Control Solutions are available to facilitate compliance with local, state and/or federal regulations
or accreditation requirements.
Consult
®
Control Solutions are produced to three concentrations that correspond to three known levels
of human hemoglobin. Refer to the product label and package insert of the Consult
®
Control Solution for
further information on storage and expiration date.
Hemoglobin Cuvettes Cuvettes in foil bag
Contents: 3 vials per package
900-501MCK
900-502MCK
900-503MCK
3 x Consult
®
Control Solution Low
3 x Consult
®
Control Solution Normal
3 x Consult
®
Control Solution High
Package configurations of Consult® Control Solutions