Contact Blocks
Face Up
13
Quality Control Testing
To assure accurate and reliable results,
McKesson TRUE METRIX® PRO oers
two kinds of Quality Control Tests.
ese tests ensure that McKesson TRUE
METRIX® PRO is working properly and
testing technique is good.
Automatic Self-Test
An Automatic Self-Test is performed
by the meter each time a test strip is
inserted correctly into the Test Port.
Insert a test strip into the Test Port.
e meter is working properly if:
~ the full Display appears, then
~ the time appears in the upper
part of the Display, and then,
~ the Drop Symbol begins to blink.
If an error message appears in the Display,
the meter will not perform a test.
See Troubleshooting or call for assistance
(see Booklet cover for phone number).
Caution! If any segments are missing in the Display
when meter is first turned on, do not use the
meter for testing. Call for assistance.
Full Display
Drop Symbol
Error Message
To Next Page
Loading...