11) Sleep Mode Setting
• Press the SLEEP button will activate the sleep mode function.
• This is an energy saving option. When the unit is operating under cooling mode, the set temperature is increased
by 0.5ºC after the first half an hour, another 0.5ºC after the second half an hour and 1ºC after the following 1 hour.
This function will prevent excessive cooling during summer season.
• When the unit is operating under heating mode, the set temperature is decreased by 1ºC after the first half an
hour, another 1ºC after the second half an hour and 1ºC after the following 1 hour. This function will prevent night
sweat during summer season.
• This function is available under COOL, HEAT and AUTO mode.
Figure 27 Sleep Mode Setting
12) Clock Time Setting
• Press + button to increase the clock time.
• Press – button to decrease the clock time.
13) Personalize Setting
• Press and hold for 3 seconds, then will blink. Press again to cycle between and .
P1 P1 P2
• Set the desired setting, then leave the handset for 4 seconds without pressing any key and it will save the setting
into the program.
• Press once to activate the P1 setting, press again to cycle between P1 and P2.
• Press any key to deactivate the personalize setting.
14) Ionizer Setting (optional)
• Press will activate the ionizer function.
• Press again to deactivate the function.
Symbol Identification
IM-5WMF(SEER13)-0706
Page 25
To Next Page
Loading...
Need help?
General
