www.marketdirect.com.au Ph: 1300 494 494
11
First, open the ue dust
cover shown.
Second, remove the Truma factory
cover by placing thumbs in the
middle of the cover and pulling the
top towards you with your ngers.
The ue should look like this when
ready to use
Gas Appliance Safety
• Gas appliances are certied and have a ame safeguard feature to stop gas ow in the event of the ame going
out. Never interfere with this function or replace appliances with a non-certied type.
• Slide-out kitchens with cookers should only be operated with an annex fully erected. Failing to do so may
affect the safety and operation of the gas appliance.
• Slide-out kitchens with cookers must only be used with a exible connecting hose that is disconnected from
the gas bayonet tting when in its stored position. Under no circumstances permanently
connect this appliance.
• Only approved and suitable gas appliances with ame safeguard systems shall be connected to the gas
bayonet (if tted).
Removing the Hot Water System Flue Cover
To use your inbuilt Truma hot water system, the external ue covers must be removed prior to starting the unit.
Removing Door Vent Cover
The door vent must be uncovered at any time the caravan is occupied.
To Next Page
Loading...
