EasyManua.ls Logo

MDC XT17-HRT - Gas Appliance Safety; Removing the Flue Cover

MDC XT17-HRT
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.marketdirect.com.au Ph: 1300 494 494
12
Remove lockable cover Remove plastic cover Ready for use
Gas Appliance Safety
Gas appliances are certied and have a ame safeguard feature to stop gas ow in the event of the ame going
out. Never interfere with this function or replace appliances with a non-certied type.
Slide-out kitchens with cookers should only be operated with an annex fully erected. Failing to do so may affect
the safety and operation of the gas appliance.
Slide-out kitchens with cookers must only be used with a exible connecting hose that is disconnected from the
gas bayonet tting when in its stored position. Under no circumstances permanently connect this appliance.
Only approved and suitable gas appliances with ame safeguard systems shall be connected to the gas bayonet
(if tted).
Removing the Flue Cover
Caution! To use your inbuilt Truma hot water system, the external ue covers must be removed prior to starting the unit.
First, open the ue dust cover shown.

Table of Contents

Related product manuals