Do you have a question about the MDS T1 and is the answer not in the manual?
Details direct wiring to the vehicle battery, stressing fuse/breaker use and correct cable gauge.
Explains locating a metal area close to the amplifier for a good ground connection.
Details Gain, Sub Sonic, and LPF controls for adjusting input sensitivity and frequency response.
Details direct wiring to the vehicle battery, stressing fuse/breaker use and correct cable gauge.
Explains locating a metal area close to the amplifier for a good ground connection.
Details Gain, Sub Sonic, and LPF controls for adjusting input sensitivity and frequency response.
| Signal-to-Noise Ratio | >90dB |
|---|---|
| THD at 4 Ohms | <0.1% |
| Fuse Rating | 40A x 2 |
| Frequency Response | 10Hz |
| Input Sensitivity | 0.2V - 6V |
| Subsonic Filter | 10Hz |
| Bass Boost | 0dB - 12dB |
| Type | Mono |
Loading...