To Next PageTo Next Page
Need help?Do you have a question about the MDS TX and is the answer not in the manual?
Overview of MDS Class D mono amplifiers, designed for low frequencies and subwoofers.
Details on high-efficiency Class D design, MOSFET power supplies, and protection circuits.
Required tools and initial considerations before starting the amplifier installation.
Essential safety steps and protective measures during amplifier installation.
Proper placement and clearance for optimal cooling and access to amplifier controls.
Identification and description of amplifier control panel ports and functions.
Setting gain, subsonic, and low-pass filters for optimal audio performance.
Connecting speakers, power input, remote trigger, and ground input terminals.
Warning about disconnecting the battery and using proper gauge power cables.
Connecting the BATT+ (Power) terminal directly to the vehicle battery using appropriate cable.
Locating a metal area near the amplifier for a good ground connection.
Connecting the REM terminal to a switched +12V source for amplifier turn-on.
Importance of fusing the main power lead near the battery for safety.
Guidance on selecting and routing RCA audio cables for optimal signal transfer.
Connecting the amplifier to factory radios without low-level RCA outputs.
Setting gain, subsonic, and low-pass filters for optimal audio performance.
Enhances low frequency response with adjustable 12dB boost centered at 45Hz.
Connecting the optional remote level control module for external gain adjustment.
Understanding the 1-Ohm minimum impedance load for Class D amplifier operation.
Connecting subwoofer wires, ensuring correct polarity and secure connections.
Wiring a single voice coil subwoofer (1-4 Ohm) for optimal amplifier performance.
Wiring two 2-Ohm single voice coil subwoofers for a 2-Ohm load.
Parallel and series wiring for dual voice coil subwoofers to achieve desired impedance.
Solutions for common amplifier problems like no output, overheating, or poor sound.
Technical details, power ratings, and dimensions for MDS Compact Class D Mono Amplifiers.
Details on the product warranty, coverage, and terms of service.
Overview of MDS Class D mono amplifiers, designed for low frequencies and subwoofers.
Details on high-efficiency Class D design, MOSFET power supplies, and protection circuits.
Required tools and initial considerations before starting the amplifier installation.
Essential safety steps and protective measures during amplifier installation.
Proper placement and clearance for optimal cooling and access to amplifier controls.
Identification and description of amplifier control panel ports and functions.
Setting gain, subsonic, and low-pass filters for optimal audio performance.
Connecting speakers, power input, remote trigger, and ground input terminals.
Warning about disconnecting the battery and using proper gauge power cables.
Connecting the BATT+ (Power) terminal directly to the vehicle battery using appropriate cable.
Locating a metal area near the amplifier for a good ground connection.
Connecting the REM terminal to a switched +12V source for amplifier turn-on.
Importance of fusing the main power lead near the battery for safety.
Guidance on selecting and routing RCA audio cables for optimal signal transfer.
Connecting the amplifier to factory radios without low-level RCA outputs.
Setting gain, subsonic, and low-pass filters for optimal audio performance.
Enhances low frequency response with adjustable 12dB boost centered at 45Hz.
Connecting the optional remote level control module for external gain adjustment.
Understanding the 1-Ohm minimum impedance load for Class D amplifier operation.
Connecting subwoofer wires, ensuring correct polarity and secure connections.
Wiring a single voice coil subwoofer (1-4 Ohm) for optimal amplifier performance.
Wiring two 2-Ohm single voice coil subwoofers for a 2-Ohm load.
Parallel and series wiring for dual voice coil subwoofers to achieve desired impedance.
Solutions for common amplifier problems like no output, overheating, or poor sound.
Technical details, power ratings, and dimensions for MDS Compact Class D Mono Amplifiers.
Details on the product warranty, coverage, and terms of service.
General