To Next PageTo Next Page
Need help?Do you have a question about the MDS T3 and is the answer not in the manual?
Adjusts input sensitivity to match the amplifier to the source unit's output level.
Variable high-pass filter (15-50 Hz) for subwoofer protection and power conservation.
Filters high frequencies for subwoofers, adjustable from 30Hz-250Hz.
Connects the amplifier to the vehicle battery with appropriate cable and inline fuse.
Locates a suitable metal area on the chassis for a secure ground connection.
Matches amplifier input sensitivity to the head unit's output level for optimal performance.
Variable high-pass filter (15-50 Hz) for subwoofer protection and power conservation.
Filters high frequencies for subwoofers, adjustable from 30Hz-250Hz.
Avoid upside down mounting, vibration, and protect wire connections from damage.
Fuse power wire at battery, disconnect battery, and use hand tightening for terminals.
Addresses problems with the power LED not turning on or no audio output.
Solutions for amplifier overheating or shutting down during operation.
Diagnosing low audio volume, alternator noise, and impedance issues.
Adjusts input sensitivity to match the amplifier to the source unit's output level.
Variable high-pass filter (15-50 Hz) for subwoofer protection and power conservation.
Filters high frequencies for subwoofers, adjustable from 30Hz-250Hz.
Connects the amplifier to the vehicle battery with appropriate cable and inline fuse.
Locates a suitable metal area on the chassis for a secure ground connection.
Matches amplifier input sensitivity to the head unit's output level for optimal performance.
Variable high-pass filter (15-50 Hz) for subwoofer protection and power conservation.
Filters high frequencies for subwoofers, adjustable from 30Hz-250Hz.
Avoid upside down mounting, vibration, and protect wire connections from damage.
Fuse power wire at battery, disconnect battery, and use hand tightening for terminals.
Addresses problems with the power LED not turning on or no audio output.
Solutions for amplifier overheating or shutting down during operation.
Diagnosing low audio volume, alternator noise, and impedance issues.
General