To Next PageTo Next Page
Need help?Do you have a question about the MDS T7 and is the answer not in the manual?
Matches amplifier input sensitivity to the source unit output level, up to 6 Volts.
Variable cutoff frequency (15-50 Hz) for subwoofer protection from unwanted low-end frequencies.
Filters out unwanted high frequencies, adjustable from 30Hz through 250Hz.
Main power input terminal, connects directly to the car battery positive terminal.
Terminal to turn the amplifier on/off via a 12V source, like a remote turn-on lead.
Ground input terminal requiring a quality connection to the vehicle chassis for optimal performance.
Connecting amplifier power directly to the battery, including inline fuse requirements for safety.
Establishing a secure ground connection to the vehicle chassis, ensuring good contact.
Matches amplifier input sensitivity to the source unit output level, up to 6 Volts.
Variable cutoff frequency (15-50 Hz) for subwoofer protection from unwanted low-end frequencies.
Filters out unwanted high frequencies, adjustable from 30Hz through 250Hz.
Main power input terminal, connects directly to the car battery positive terminal.
Terminal to turn the amplifier on/off via a 12V source, like a remote turn-on lead.
Ground input terminal requiring a quality connection to the vehicle chassis for optimal performance.
Connecting amplifier power directly to the battery, including inline fuse requirements for safety.
Establishing a secure ground connection to the vehicle chassis, ensuring good contact.
General