MDS T7 - SPECIFICATIONS FOR COMPACT CLASS D MONO AMPLIFIERS

SPECIFICATIONS FOR COMPACT CLASS D MONO AMPLIFIERS
ONE CHANNEL MODELS
MDS T1 XTR MDS T3 XTR MDS T5 XTR
Power Output @ 14.4 VDC Input
MDS T1 XTR MDS T3 XTR MDS T5 XTR
4 Ohms RMS Power (Wats) 200 x 1 400 x 1 600 x 1
2 Ohms RMS Power (Wats) 300 x 1 600 x 1 1000 x 1
1 Ohms RMS Power (Wats) 500 x 1 1000 x 1 1500 x 1
Music Power (Wats) 1000 2000 3000
THD @ RMS Power < 0.5% < 0.5% < 0.5%
Frequency Response 10Hz - 250Hz 10Hz - 250Hz 10H
z - 250Hz
S/N Raio (EIA Rated) > 90dB > 90dB > 90dB
Input Sensiivity 0.25V - 6.0 Volts 0.25V - 6.0 Volts 0.25V - 6.0 Volts
Crossover Slope 12dB 12dB 12dB
Low-Pass Crossover Freq. (Hz) 35 - 250Hz 35 - 250Hz 20 - 250Hz
Bass EQ (on/off) 0/12dB 0/12dB 0/12dB
Subwoofer EQ Freq. 45Hz 45Hz 45Hz
Fuses/ ATC Style 25A x 2 35A x 3 35A x 4
Heat sink standard ISO YES, 180 x 50mm YES, 180 x 50mm YES, 180 x 50mm
Dimension (50mm H x 180mm W) 246mm
L 303mm L 353mm L
NOTE:
a power drill is used to tighten the screws on the terminal blocks.
This will prevent stripping or other possible damage to the amplifier.
21