POWER WIRING AND SIGNAL CONNECTIONS
Your MDS amplifier requires unrestricted current to deliver peak performance, so do
not “starve” your amplifier by using small power cable. Using under sized power cable
can result in unnecessary over-heating of the amplifier, distortion at high volume levels
and might even cause the thermal protection circuitry to shut-off the amplifier. For best
results we recommend a MDS amplifier install kit or MDS copper cable.
to prevent accidental shorting or shearing. Make sure the cables do not inter-
fere with normal operation of the vehicle.
potential sources of electrical interference such as electronic vehicle manage
To Next Page
Loading...
