Mebay DC52D MK3 User Manual

DC5xD MK3 GENSET CONTROLLER USER MANUAL
6
 Battery charging control function,which can protect the battery according to battery
voltage status.
 Sensor can be self-defined by front face button or PC software.
 Adapt to 3P4W,1P2W,2P3W(120V/240V,50/60HZ)
 Various of crank conditions (RPM, Frequency, Oil Pressure) can be chosen.
 Control Protection: Auto Start/Stop of genset, load transfer (ATS control) and
perfect failure display and protection.
 Standard water-proof rubber gasket. The waterproof can reach IP54
 Module design: All the connections are adapted with European connectors so that
installation, connection, repair and replacement can be more easily.
3. Parameters Display
 Engine RPM
 Engine oil pressure
 Engine temperature
 Engine fuel level
 Engine battery voltage
 Charging voltage
 Mains Frequency (only for DC52D MK3)
 Mains phase voltage L-N (only for DC52D MK3)
 Mains phase voltage L-L (only for DC52D MK3)
 Generator 3 Phase voltage L-N
 Generator 3 Phase voltage L-L
 Generator 3 phase current A
 Generator Frequency Hz
 Generator Power Factor COS φ
 Generator active power KW
 Generator apparent power KVA
 Generator reactive power KVar
 Real-time load rate %
 Current load rate %
 Average loading rate %
 Current consumption KWH
 Total consumption KWH
 Total Crank times
 Cumulative power on time of controller
 Current running time
 Total running time
 Maintenance notice
 Switches input status display
 Output status display of relays
 Current date and time;
4. Protection
 Over speed
 Under speed

Mebay DC52D MK3 Specifications

General

Brand	Mebay
Model	DC52D MK3
Category	Controller
Language	English