Mebay DC52D MK3 - Parameters

DC5xD MK3 GENSET CONTROLLER USER MANUAL
7
 Low oil pressure
 High temperature
 Low fuel level
 External emergency alarm
 D+ open
 RPM Lost
 Sensor Open
 Over Frequency
 Under Frequency
 Over voltage
 Under voltage
 Over current
 Non-balance of current
 Over power
 Maintenance expire
 Low water level alarm
 Emergency Stop
 Crank failure
 Battery over voltage
 Battery under voltage
 The charger fails to charge
 Charger charging failure
 Stop Failure
5. Parameters
Options
Parameters
Working voltage
DC8V----36V Continuous
Power consumption
Standby：24V：MAX 1W
Working：24V：MAX5W
AC Voltage Input
1P2W 30VAC-276VAC (ph-N)
2P3W 30VAC-276VAC (ph-N)
3P4W 30VAC-276VAC (ph-N)
Rotate speed sensor
Frequency
50-10000Hz
MAX Accumulating Time
99999.9Hours（Min Store time:6min）
Fuel Relay Output
Max 16Amp DC+VE Supply voltage
Start Relay Output
Max 16Amp DC+VE Supply voltage
AUX. OUTPUT 1
Max 16Amp DC+VE Supply voltage
AUX. OUTPUT 2
Max 16Amp DC+VE Supply voltage