Page 2-11
2047ES / 2647ES / 3247ES Operator’s Manual July 2005
OPERATION
THE OPERATOR MUST BE AWARE OF THE ENVIRONMENT.
DO NOT RAISE THE PLATFORM IF THE MACHINE IS NOT ON A
FIRM LEVEL SURFACE.
SAFE OPERATION BEGINS WITH A SAFETY CONSCIOUS
EQUIPMENT OPERATOR.
Perform prestart inspection. Remember to place the selector switch in the “Platform” posi-
tion before getting in the platform for operation.
DRIVING AND STEERING
CHECK THAT THE ROUTE OF TRAVEL TO BE TAKEN IS
CLEAR OF PERSONS, OBSTRUCTIONS, DEBRIS, HOLES, AND
DROP OFFS, AND IS CAPABLE OF SUPPORTING THE
MACHINE.
NOTE: To activate drive function, activate mode selector switch in “Drive”
position. Depressing the Enable bar, drive and steer functions can be
achieved. Steer wheels will not center themselves after a turn, and must be
returned to the straight-ahead position with the steer switch.
Controller handle movement “away” from the operator will give FORWARD travel and
pulling the handle “towards” the operator will give REVERSE travel.
Travel speed is proportional and is controlled by the movement of the controller handle.
The further it is moved the faster the speed will be. The controller handle returns to neutral
(center) position when released.
Courtesy of Crane.Market
To Next Page
Loading...
