EasyManua.ls Logo

Mec 3247ES - Page 40

Default Icon
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 3-8
July 2005 2047ES / 2647ES / 3247ES Operators Manual
NRU NRU NYY Y
Key: "Y" Yes/Acceptable
"N" No/Unacceptable
"R" Repaired
"U" Unnecessary/Not Applicable
RU
Comments:
Signature/Mechanic:
Signature/Owner-User:
Date:
Date:
P/N 90728 Rev. 1
Check each item listed below.
Use proper Operating, Service, and
Maintenance manual for specific information and settings.
If an item is found to be "Unacceptable" make the necessary
repairs and check the "Repaired" box.
When all items are "Acceptable", the unit is ready for service.
Customer
Street
City/State/Zip
Phone Number
Contact
Dealer
Street
City/State/Zip
Phone Number
Contact
Date
Serial Number
Model Number
Date Of Last Inspection
Date Placed In Service
Annual Inspection
Report
Aerial Platform Sales Corp.
1775 Park Street, Suite 77 Selma, CA 93662 USA
800-387-4575 559-891-2488 Fax: 559-891-2493
Decals:
Proper Placement/Quantity
Legibility
Correct Capacity Noted
Rails:
All Rail Fasteners Secure
Entry Gate/Chain Closes Properly
Manual/Safety Data In Box
Rear Rail Pad In Place
Extending Platform:
Slides Freely
Latches In Stowed Position
Latches In Extended Position
Rail Latches Work Properly
Cable Secure
Platform:
Platform Bolts Tight
Platform Structure
Platform Overload System:
Functional
Calibrated
Wire Harnesses:
Mounted Correctly
Physical Appearance
110/220V Outlet Safe/Working
Scissors:
Beam Structures
Welds
Retaining Rings
Upper Cylinder Pins Secure
Lower Cylinder Pins Secure
Lower Beam Mounts tight
Rollers Turn Freely
Maintenance Locks:
Secure
Operational
Base:
Cover Panels Secure
Base Fasteners Tight
Bolts Tight
Front Axle Mounting (4WD)
Rear Axle Mounting (4WD)
Front Axle/Front Wheel Assemblies:
Wheel Motors-Mounting Secure
Wheel Motors-Leaks
Lug Nuts Torqued Properly
Steering Cylinder Pins Secure
Pivot Points Lubed
Drive Assembly Front Hubs:
Castle Nut Torqued Properly
Cotter Pinned
Rear Axle/Rear Wheel Assemblies:
Brakes Operational
Wheel Motors-Mounting Secure
Wheel Motors-Leaks
Lug Nuts Torqued Properly
Axle Pivot Libed (4WD)
Axle Lock Operational
Component Area:
Valve Manifold(s) Secure
Hoses Tight/No Leaks
D/C Mtr(s) Secure/Operational
Contactors Secure
Pump Secure
Batteries:
Secure
Fully Charged
Battery Charger:
Secure
Operational
Emergency Stop:
Breaks All Circuits
Operation:
Wires Tight
Switches Secure
All Functions Operational
Emergency Down:
Operational
Slow Speed Limit Switch:
Set Properly
Pothole Bars:
Operate Smoothly
Lock In Place
Limit Switches Adjusted
Pressures & Hydraulics:
Oil Filter Secure/Chg
Oil Level Correct/Chg
Steering Pressure Set
Drive Pressurre Set
Lift Pressure Set
Engine:
Engine Mounts Tight
Fuel Lines Secure
Fuel Lines Free Of Leaks
Fuer Tanks Secure
Fuel Shut Off Valves Func.
All Shields/Guards In Place
Oil Level
Oil Filter
Air Filter
Options Operational:
Hour Meter
Battery Indicator
Warning Light
Warning Horn
Generator
Converter
Courtesy of Crane.Market

Related product manuals