MACHINE USE AND CARE
Always be sure the operator is familiar with proper safety
precautions and operation techniques before using
machine.
Do not force the machine. Machines do a better and
safer job when used in the manner for which they are
designed.
Storing the machine. When the machine is not in use,
store it in a dry, secure place or keep it well-covered and
out of the reach of children. Inspect the machine for good
working condition prior to storage and before each use.
Maintain the machine. It is recommended that the gener-
al condition of the machine be examined before it is used.
Keep your machine in good working order by adopting a
program of conscientious repair and maintenance in
accordance with the recommended procedures found in
this manual. If any abnormal vibrations or noise occurs,
turn the machine off immediately and have the problem
corrected before further use.
Cleaning. Use a pressure washer to clean the carbide
teeth while taking care not to pressure-wash the bearings
as this could introduce water into areas of the machine
that may cause malfunction or damage.
Use only accessories that are recommended by the manu-
facturer. Accessories that may be suitable for another
machine may create a risk of injury when used on this
machine.
Always operate the machine with all safety devices and
guards in place and in good working order. DO NOT modify
or make changes to safety devices. DO NOT operate the
machine if any safety devices or guards are missing or
inoperative.
Never leave the machine running unattended.
Never use the machine to grind anything other than
stumps or for any purpose other than grinding stumps as
described in this manual.
21
www. mechmaxx.com
MACHINE USE AND CARE
To Next Page
Loading...