STORING GRINDER
REMOVE FROM STORAGE
ƒ Store grinder in a dry place.
ƒ Clean grinder thoroughly. Dirt and wood chips will
draw moisture and cause rust.
ƒ Lubricate machine. (See Service and Maintenance
section.)necessary. (See Service and Maintenance
section.)
ƒ Check condition of cutting teeth. Replace as
ƒ Check for loose or missing hardware.
ƒ Paint parts as necessary.
ƒ Store PTO driveshaft off the ground.
ƒ Review Operator's manual and check adjustments.
ƒ Lubricate machine. (See Service and Maintenance
section.)
ƒ If parts have been replaced, verify they run properly.
STORAGE
STORAGE
24
www. mechmaxx.com
To Next Page
Loading...