mectron Silverlight - 1 Identification Data; Identification Datas; Identification Plate of the Recharging Unit

5
silverlight - manual of use and maintenance
Fig. 1
�
DANGER: Infection control.
In order to ensure maximum safety for both the patient and the operator, clean, disinfect and sterilize the
ber optic and the optical protection before each treatment. Follow the instructions provided under point
“07.0” closely.
�
DANGER: Use only original Mectron S.p.A. accessories and spare parts.
�
DANGER: Checking the condition of the device before treatment.
Before each treatment always check that the equipment is in proper working order and that the
accessories are efcient.
Do not carry out the treatment if any problems are encountered in operating the apparatus.
If the problem concerns the equipment, contact an authorized technical service center.
�
DANGER: Do not install the equipment anywhere there is a risk of explosions.
The equipment cannot function in places where there is an inammable atmosphere (anesthetic mixtures,
oxygen, etc.).
�
DANGER: Do not use the recharging unit to recharge other types of batteries or other
equipment with rechargeable batteries.
01.0 Identication data
01.1 Identication datas
An exact description of the model including the serial number of the equipment will make it easier for GC
America Inc. Customer Service to provide rapid and effective answers.
Always provide the above information whenever you contact GC America Inc. Customer Service.
01.2 Identication plate of the recharging unit
Each recharging unit has an identication plate (Fig. 1) on which the technical specications and the serial
number are indicated. The identication plate is xed to the underside of the equipment. The remaining
data are contained in this manual (see point “11.0”).