Setup
This section contains information about setting up your instrument and preparing to play. Please go through this section carefully
before turning the power on.
Part List
6
Before you proceeding to assemble the stand, get a Philip's
screwdriver (not supplied).
Make sure you have the following parts, which are supplied into
package.
Setup Guide
3
4
5
6
7
8
9
2
1
1. Piano body
2. Speaker box line
3. Screw cap(8)
4. Ф6X45“+”screw(8)
5. Hand screw(2)
6. ST side board left
7. ST side board right
8. Pedal box
9. Speaker box
10. Pedal box wooden feet
10
STEP 1: With 4 pcs 3.5x16 “+” screws as shown fixed Pedal box
wooden feet on Pedal box.