Setup
Power Supply
1. Please make sure that POWER ON/OFF switch of the instrument is
set to OFF. Then turn the [VOLUME] knob to the minimum volume
level.
2. Connect the AC adaptor to the power supply jack.
3. Plug the AC adaptor into an AC outlet. And when turning the power
OFF, please simply reverse the procedure please.
4. Turn the power ON. The LED on the panel will light up.
Note:
When the keyboard is not in use or during thunderstorm, please
disconnect the power for safety purpose.
In order to save energy, we have designed the “Automatic Shutdown”
function to the piano. With this function, the piano will shutdown
automatically when you have left it idle for more than 30 minutes. If you
don’t need this feature, just press and hold the [A0] key (the 1st key)
and turn it on.
8
MIN MAX
VOLUME
STEP 5: According to the labeling inserted foot line and speakers line,
installation is complete.
To Next Page
Loading...
Need help?
General
