You can use the volume sliders to adjust the relevant volumes respec-
tively.
Press the [ ] button to select a group of parameters to edit. LED of
the selected group will be lit. Now you can move the sliders to adjust
the volumes of the selected group.
For example, adjust the snare volume.
1. Press the [ ] button to select the upper group which the snare
volume belongs to. The upper group LED will be lit.
2. Move the SNARE slider to adjust the snare volume.
Note:
Pressing the [ ] button will not affect the current volume. The
relevant volume will change only when you move the slider.
2. Press the [ ] button to start the practice.
It will play a count-in of about one measure length, then you can
start practice. The LCD will show the accuracy of each hit. Prior to
beat changing, the beat indicator will blink and “CHANGE!” will
appear on LCD, indicating it will change to this beat type in the next
measure. During practice, you can press [F3 (TEMPO)] to edit the
tempo.
3. Press the [ ] button again to stop the practice.
Note:
When score function is in use, it will automatically stop and score the
practice after the specified loops are finished.
Coach
Volume Sliders
21
Upper Group (corresponding to the upper LED)
KICK
SNARE
TOM1
TOM2
TOM3
TOM4
Lower Group (corresponding to the lower LED)
HI-HAT
CRASH1
CRASH2
RIDE
KIT
SONG
Kick volume
Snare volume
Tom 1 volume
Tom 2 volume
Tom 3 volume
Tom 4 volume
Hi-hat & hi-hat pedal volume
Crash 1 volume
Crash 2 volume
Ride volume
Drum kit volume
Song playback volume
HI-HAT CRASH 1 CRASH 2 RIDE KIT SONG
KICK SNARE TOM 1 TOM 2 TOM 3 TOM 4
C
M
Y
CM
MY
CY
CMY
K
AW_DD635_manual_G01_180521.pdf 21 18/5/21 10:03
To Next Page
Loading...
Need help?
General
