8
Crash
Hi-hat
Module
Pedal (Hi-hat)
Kick Pedal
Kick Pad
Snare
Tom1 Tom2
Tom3
Setup
Caution!
To prevent electric shock and damage to drum module or other devices, always turn off the power of all devices
before making any connections.
Connecting Pads and Pedals
Standard configuration: Kick Pad, Kick Pedal, Snare (2-zone), Tom 1~3 (2-zone), Crash (with choke), Ride
(2-zone with choke), Hi-hat, Pedal (Hi-hat).
Notes:
1. Use the provided cables to connect the pads to the Trigger Input jack on the rear panel of the module. Make
sure each pad is connected to its corresponding trigger input jack.
2. Refer to the Setup Guide for details on assembling the drum stand, attaching the drum pads and module.
Ride
To Next Page
Loading...
