MEDENUS R 100 User Manual

26
© 11.2023
10 Replacement and Disposal
After the device has reached the end of its useful life, it must be dismounted and disposed of in an
environmentally compatible manner.
During dismounting, components that may present a risk of injury by contamination,
depending on the medium, are removed. Depending on the processed medium, the
components must be properly decontaminated. Diffusible components (diaphragm, O-ring, etc.)
may have to be taken to a special disposal unit, depending on the medium used.
If no return or disposal agreement
has been signed, dismantled components should be recycled:
• Metals should be scrapped
• The remaining components should be disposed of after sorting according to material.
Alternatively, scrapping by MEDENUS can be agreed with the service. The return is at your own expense, the disposal
by MEDENUS is free of charge.
For technical information, please contact our customer service:
MEDENUS Gas-Druckregeltechnik GmbH
Im Langen Feld 3
D-57462 Olpe
Phone +49 (0) 2761 / 82788-0
Fax +49 (0) 2761 / 82788-9
E-mail service@medenus.de
Internet www.medenus.de
ATTENTION
In addition, we are always interested in information, suggestions and experience resulting from the
application and which can be valuable for improving our products.
Note

MEDENUS R 100 Specifications

General

Brand	MEDENUS
Model	R 100
Category	Controller
Language	English