MEDENUS R 100 User Manual

Table of Contents
1 General Information 6
1.1 Warranty and Liability 6
1.2 Symbols, Notes 7
1.3 Terms, Abbreviations 7
2 Application, Characteristics 8
2.1 Application 8
2.2 Characteristics 8
2.3 Types of Models (Options) 8
3 Avoidance of Foreseeable Misuse 8
4 Safety Instructions 9
4.1 Hazards of Handling the Device 9
4.2 Personnel Requirements 9
4.3 Country-Specific Requirements 9
4.4 Handover of the Operating and Maintenance Instructions 9
4.5 Safety in Operation 10
4.6 What to Do in Case of Danger 10
5 Responsibility of the Operator 10
6 Transport, Storage and Packaging 11
6.1 Transport 11
6.2 Storage 11
6.3 Packaging 11
7 Mounting and Commissioning 12
7.1 Safety Instructions and Preparation 12
7.2 Mounting 12
7.3 Leakage Test (Test for External Leakage) 14
7.4 Initial Commissioning / Recommissioning 15
7.5 Diaphragm Assembly Setpoint Spring Table 17
7.6 SSV Set point Spring Table - Control Device 19
7.7 Decommissioning 21
8 Maintenance 21
8.1 Maintenance Plan 21
8.2 Maintenance Procedure 22
8.3 Table of Screw Tightening Torques M
A
23
8.4 Lubricants Table 23
8.5 Screw Retention 23
9 Troubleshooting 24
9.1 Gas Pressure Regulator 24
9.2 Safety Shut-Off Valve 25
10 Replacement and Disposal 26
11 Spare Parts 27
11.1 Spare Parts Drawing RS 250 / RS 251 DN 25 - DN200 27
11.2 Optional Spare Parts Drawing 28
11.3 Parts for Maintenance Work 29
Main Diaphragm and O-Ring 29
Intermediate Diaphragm 29
Valve Plate 29
Valve Plate SSV / Diaphragm SSV 30
O-Ring and Sealing Ring Sets 30
Safety Diaphragm 31

MEDENUS R 100 Specifications

General

Brand	MEDENUS
Model	R 100
Category	Controller
Language	English