To Next PageTo Next Page
Need help?Do you have a question about the Mediblink M520 and is the answer not in the manual?
General| Measurement Procedure: | Oscillometric, corresponding to Korotkoff method: Phase I: systolic, Phase V: diastolic |
|---|---|
| Measuring range: | Pressure: 30 to 280 mmHg (in 1 mmHg increment) Pulse: 40 to 199 beat / minute |
| Static accuracy: | Pressure: ± 3 mmHg Pulse: ± 5 % of reading |
| Measuring resolution: | 1 mmHg |
| Inflation: | Automatic inflation by internal pump |
| Memory function: | 2 x 120 memories for 2 users (SYS, DIA, Pulse) |
| Decompression: | Constant exhaust valve system |
| Mode of operation: | Continuous operation |
| Display: | Digital display |
| Cuff pressure display range: | 0 ~ 290 mmHg / 0 ~ 38.7 kPa |
| Power source 1 (Battery): | 4- size “AA” alkaline Batteries |
| Power source 2 (Adapter): | Input : 100-240V ~ 50 / 60 Hz 0.2A Output : 6V – 0.6A |
| Operation temperature: | 5 ~ 40°C / 41 ~ 104°F |
| Operation humidity: | 15 % ~ 80 % RH maximum |
| Storage temperature: | -20 ~ +55°C / -4 ~ +131°F |
| Storage humidity: | 10 % ~ 95 % RH maximum |
| Protection against ingress of water: | IP22 |
| Electrical shock protection: | Internal power unit |
| Safety classifications: | Type BF equipment |
| Accessories: | M-L size Cuff, 4 “AA” batteries, instruction manual |
Weight and Dimensions| Dimensions: | 120 × 80 × 38 ±1.0 mm |
|---|---|
| Weight: | 510 g ± 5g (including batteries and cuff) |
