What to do if the replace filter light remains lit after filter replacement on my Medify Air Air Cleaner?
If the replace filter light stays on after you've changed the filter on your Medify Air Air Cleaner, it means the replace filter indicator needs to be reset. To do this, press and hold the DIMMER button for 3 seconds until the replace filter light turns off.
Why is my Medify Air Air Cleaner making excessive noise?
If your Medify Air Air Cleaner is making excessive noise, it might be because the unit isn't level. Try placing it on a flat, level surface to reduce the noise.
Why is airflow reduced in my Medify Air MA-112-PRO?
Reduced airflow in your Medify Air Air Cleaner can happen for a couple of reasons: * The back grille, side intakes, or front outflow area might be blocked. Make sure these are clear. * The filter may need replacing. Try replacing the filter.
General| Filter Type | HEPA H13 |
|---|---|
| Coverage Area | 5, 000 sq ft every hour or 2, 500 sq ft every 30 minutes |
| CADR (Clean Air Delivery Rate) | 950 |
| Fan Speeds | 3 |
| Dimensions | 16.1" D x 32.3" H x 13.4" W |
| Weight | 35 lbs |
| Power Consumption | 115W |
| Warranty | Lifetime |
To Next Page
