How to reset filter light on Medify Air Air Cleaner?
If the replace filter light remains lit on your Medify Air Air Cleaner after replacing the filter, it likely means the replace filter indicator needs to be reset. To reset it, press and hold the DIMMER button for 3 seconds until the replace filter light turns off.
Why is my Medify Air MA-25 not removing odors?
If your Medify Air Air Cleaner isn't removing odors effectively, the filter likely needs to be replaced. Replace the filter to restore optimal odor removal.
How to reduce noise from Medify Air MA-25 Air Cleaner?
Excessive noise from your Medify Air Air Cleaner is often due to the unit not being level. Place the unit on a flat and level surface to reduce the noise.
Why is airflow reduced in my Medify Air Air Cleaner?
Reduced airflow in your Medify Air Air Cleaner can be caused by several factors. First, make sure that side intakes are not blocked or the front outflow area. Second, the pre-filter may need vacuuming; use the brush attachment of your vacuum cleaner to vacuum it. Finally, the filter may need to be replaced.
General| Filter Type | HEPA H13 |
|---|---|
| Fan Speeds | 3 |
| Power Consumption | 45W |
| Pre-filter | Yes |
| Activated Carbon Filter | Yes |
| Warranty | Lifetime |
| CADR Rating | 250 CFM |
| Ozone Emission | 0 |
| Number of Filters | 3 |
To Next Page
