Need help?Do you have a question about the Medify Air MA-40UV and is the answer not in the manual?
General| Room Coverage | 1, 600 sq. ft. |
|---|---|
| Filter Type | HEPA H13 |
| UV-C Light | Yes |
| Fan Speeds | 3 |
| Power Consumption | 100 W |
| Number of Filters | 3 |
Removes hair, fibers, and large particles like dander.
Removes 99.99% of particles down to 0.1 microns, including PM2.5.
Removes toxic odors, smoke, and formaldehyde.
Produces negative ions to neutralize positively charged particles.
Freshens air by sterilization and disinfection function.
Place the machine in a dry location on a smooth and flat surface.
Press top buttons to release and lift the back cover.
Pull the old filter by the tab at the top.
Remove plastic packaging from the new filter before installing it.
Place new filter with white side facing you, tab at the top.
Securely replace the back cover after filter installation.
Unpack, place on a level surface, and plug in the air purifier.
Turn on/off unit and cycle through low, medium, high, and sleep fan speeds.
Set the operational timer for 1, 2, 4, or 8 hours.
Control the ionizer function, which freshens air when active.
Wipe the unit with a clean dry cloth; ensure vents are dust-free.
Indicator lights signal when the filter needs replacement.
Hold FAN SPEED and IONIZER buttons for 3-5 seconds to reset.
Details on maintaining the lifetime warranty, including registration and filter replacement.
To Next Page
